Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip Right-Angle SMT type connectors series. Designed for reliable electronic connections, these connectors feature a robust construction with LCP housing and actuator, and phosphor bronze terminals and fitting nails. They are suitable for applications requiring a voltage rating of up to 50V AC and a current rating of 0.5A DC, operating within a temperature range of -55C to +85C. The easy-on, back-flip design facilitates simple and secure FPC insertion and removal.
Product Attributes
- Brand: DAET
- Manufacturer: (ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD)
- Model Series: CAX-AFC24-**XIB-H2.0
- Pitch: 0.5mm
- Height: 2.0mm
- Type: FPC Easy-on Back-flip Right-Angle SMT Connector
- Housing Material: LCP (Liquid Crystal Polymer)
- Housing Color: White
- Actuator Material: LCP
- Actuator Color: Black
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Flammability Rating: UL94V-0
Technical Specifications
| Item | Specification | Test Condition |
| Rating |
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | |
| Electrical Performance |
| Contact Resistance | 40 m Max. | Mate applicable FPC, test voltage 20mV, limited current 10mA (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, apply 500V DC between adjacent terminals or ground (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC (rms) for 1 minute between adjacent terminals or ground (EIA-364-20) |
| Mechanical Performance |
| FPC Retention Force | 0.30N Min. | Insert actuator, pull FPC at 253mm/min. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at 253mm/min on terminal in housing. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at 253mm/min on fitting nail in housing. |
| Environmental Performance and Others |
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at < 10 cycles/min. |
| Temperature Rise | 30C Max. | Mate applicable FPC, measure contact point temperature rise at max rated current (EIA-364-70 Method 2) |
| Vibration | Appearance: No Damage, Contact Resistance: 60m Max., Discontinuity: 1sec Max. | Mate connectors, pass DC 1mA, 10~55~10 Hz (1 min), 2 hrs in X,Y,Z axes (Amplitude 1.5mm P-P) (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage, Contact Resistance: 60m Max., Discontinuity: 1sec Max. | Mate applicable FPC, pass DC 1mA, 490m/s {50G} shock 3 times in 6 directions (Total 18 shocks) (EIA-364-27, Test Condition A) |
| Heat Resistance | Appearance: No Damage, Contact Resistance: 60m Max. | Mate applicable FPC, expose to 852C for 96 hrs, condition at room temp 1-2 hrs. |
| Cold Resistance | Appearance: No Damage, Contact Resistance: 60m Max. | Mate applicable FPC, expose to -402C for 96 hrs, condition at room temp 1-2 hrs. |
| Humidity | Appearance: No Damage, Contact Resistance: 60m Max., Dielectric Strength: No Breakdown, Insulation Resistance: 30 M Min. | Mate applicable FPC, expose to 602C, 90-95% RH for 96 hrs, condition at room temp 1-2 hrs. |
| Temperature Cycling | Appearance: No Damage, Contact Resistance: 60m Max. | Mate applicable FPC, subject to 5 cycles (-553C 30min / +853C 30min), condition at room temp 1-2 hrs. |
| Salt Spray | Appearance: No Damage, Contact Resistance: 60m Max. | Mate applicable FPC, expose to 51% NaCl solution at 352C for 484 hrs, rinse with clean water and dry. |
| SO2 Gas | Appearance: No Damage, Contact Resistance: 60m Max. | Mate applicable FPC, expose to 505 ppm SO2 gas at 402C for 24 hrs. |
| NH3 Gas | Appearance: No Damage, Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. | Conductive terminals immersed in molten solder (2455C) up to 0.1mm from housing for 30.5 sec. |
| Resistance to Soldering Heat (Soldering Iron) | Appearance: No Damage | 0.2mm from terminal tip and fitting nail tip. Soldering time: 5 sec Max. Solder temperature: 370~400C. |
Usage Instructions
Operation of ZIF Back-flip Type:
- Step 1: Insert the FPC with the actuator opened.
- Step 2: FPC is totally inserted and not moved. Press the actuator and rotate down to secure.
- Step 3: Lift the actuator, withdraw FPC.
Warnings:
- The rotation angle cannot be greater than 90 degrees.
- The pressure applied should be average and on the center of the actuator.
- Lift the actuator at the center.
- PCB board flatness must be within 0.1mm max.
Material Safety Data Sheet (MSDS) - LCP E6808
1. Chemical Name: LCP E6808 (Liquid Crystal Polymer)
2. Substance Identity and Company Contact Information:
- Material Name: LCP Plastic Granules
- Material Specification: LCP E6808
- Manufacturer: A (Shenzhen)
3. Chemical Composition:
- Raw Material: 65%
- Glass Fiber Content: 35%
4. Hazards Identification: No health, environmental, or physical/chemical hazards identified.
5. First Aid Measures:
- Inhalation: Move to fresh air, seek medical attention.
- Skin Contact: Wash with water. For molten plastic, wash with soap and water, seek medical attention.
- Eye Contact: Rinse with plenty of water for at least 15 minutes. Seek medical attention if discomfort persists.
- Ingestion: Induce vomiting, rinse mouth with water, seek medical attention.
6. Fire-fighting Measures:
- Suitable Extinguishing Media: Water, foam, dry powder.
- Special Fire Fighting Procedures: Remove combustibles.
- Protective Equipment: Self-contained breathing apparatus.
7. Accidental Release Measures: Avoid slipping hazard from granules. Recover or dispose of waste.
8. Handling and Storage: Keep away from fire. Store in a cool, dry place, avoid direct sunlight and rain.
9. Exposure Controls and Personal Protection:
- Ventilation: Use to remove dust, smoke, and gas.
- Personal Protective Equipment: Respirator, leather gloves, safety glasses/goggles.
10. Physical and Chemical Properties:
- Physical State: Granular
- Odor: None
- Boiling Point: 305C
- Density: 1.67
11. Stability and Reactivity: Stable under normal conditions. Decomposition products: CO, NO.
12. Toxicological Information: LD50 (oral, rat) >5000mg/kg. Mild eye and skin irritant.
13. Ecological Information: Prevent ingestion by marine life or birds.
14. Disposal Considerations: Incinerate or landfill according to local regulations.
15. Transport Information: Unclassified.
16. Regulatory Information: None.
Material Safety Data Sheet (MSDS) - Mist Tin Solution
1. Chemical Identification: Mist Tin Solution
2. Manufacturer/Supplier: (Yuanfang Electronics Plating Co., Ltd.)
3. Main Components: Organic acid, tin, mist tin additives (50-60%)
4. Health Hazards: Irritating to eyes and skin. Inhalation may cause breathing difficulties.
5. First Aid Measures:
- Skin Contact: Wash with soap and water, remove contaminated clothing, seek medical attention.
- Inhalation: Move to fresh air, seek medical attention.
- Eye Contact: Rinse immediately with plenty of water, seek medical attention.
- Ingestion: Drink plenty of water, induce vomiting, seek medical attention.
6. Fire and Explosion Hazards: Non-flammable. May produce toxic vapors when heated.
7. Accidental Release Measures: Avoid spillage. Ensure good ventilation. Treat wastewater.
8. Handling and Storage: Avoid contact, ingestion, inhalation. Store in a cool, dry, ventilated place. Temperature: 255C, Humidity: 80%.
9. Exposure Controls and Personal Protection: Wear personal protective equipment (respirator, chemical safety goggles, protective clothing, acid-alkali resistant gloves).
10. Physical and Chemical Properties: Colorless liquid. Boiling Point: 100C. pH: 0.5-1.8.
11. Stability and Reactivity: Stable. Avoid contact with strong alkaline materials. Combustion products: carbon oxides.
12. Toxicological Information: No specific LC50 or STEL data provided.
13. Environmental Ecological Information: No data provided.
14. Transport Information: UN Number: 200 NA.
15. Applicable Regulations: Complies with relevant safety regulations.
16. Other Information: References to MSDS from Aldrich, Sigma, RDH, Fluka, Mallinckrodt Baker.
2507091655_CAX-CAX-AFC24-04XIB-H2-0_C49274059.pdf
|
|
FPC Easy-on Back-flip Right-Angle SMT Connector 0.5mm Pitch Featuring CAX CAX-AFC24-04XIB-H2.0 Model Images
|
