| Seal | IEC 60529 IP 68 |
| Enclosure Ratings | UL 50E 4 x 4 (requires stainless hardware - type 304 or 316) |
| Wire Size (AWG) | 10 to 8 AWG |
| Wire Size (mm) | 6.0 to 8.4 mm |
| Operating Temperature | -40 to 105C (-40 to 221F) |
| Mating Cycles (no load) | 250 min |
| Mating Force (nominal) | 28 lbf / 125 N |
| Unmating Force | 12 lbf / 53 N |
| Contact Retention Force (min) | 50 lbf / 222 N |
| Touch Safe | IEC 60529 IP 20 (female socket side only) |
| Current Rating (10 AWG) | UL 1977: 45A, CSA: 30A |
| Current Rating (8 AWG) | UL 1977: 60A, CSA: 40A |
| Voltage Rating | UL 1977 (AC/DC): 600V |
| Grounding | UL 2238, Sec 37.8 |
| Contact Resistance (average) | 0.300 Milliohms |
| IEC 61984 AMP Rating AC | 60A |
| IEC 61984 Voltage Rating AC | 800V AC (operational) |
| IEC 60529 Protection Degree | IP20 Unmated, IP68 Mated |
| Cycle Life | IEC 60512 Test 9A - 5000 Cycles |
| Impact Test | IEC 60512 @ 29.5 Inches - dropped 8 times |
| Creepage / Clearance | IEC 60950-1 9.55 (mated or unmated) |
| Material Group | Illa |
| Torque Requirements | Hand tighten. Using a 44 mm wrench or strap wrench, tighten an additional 3/41 turn (approximately 7.9 Nm (70 in-lb)). |
| Models | SK1-076D05 (Inline Receptacle), SK6-076D05 (Plug), SK2-076D05 (Panel Mount Receptacle & Gasket) |
| Dimensions (Plug) | [3.9] 99.0 mm Length, [2.36] 60 mm Width, [3.19] 81.0 mm Height, [2.98] 75.8 mm Depth, [2.47] 62.8 mm Depth, [1.31] 33.2 mm Depth, [0.98] 25.0 mm Depth |
| Dimensions (Panel Mount Receptacle) | [4.3] 110.0 mm Mated Length to Panel Receptacle, [3.03] 77.0 mm Depth, [2.52] 63.9 mm Depth |
| Dimensions (Inline Receptacle) | [4.3] 110.0 mm Mated Length to Panel Receptacle, [3.93] 99.8 mm Length, [6.9] 175.0 mm Mated Length to Plug |
| Dimensions (Plug Cover Kit) | [2.83] 71.8 mm Depth, [2.70] 68.6 mm Depth, [1.10] 28.0 mm Depth, [2.93] 74.5 mm Depth, [2.47] 62.8 mm Depth, [1.59] 40.5 mm Depth |
